Language / 简体中文
overseas@unistrong.com
+86(10)5827 5505      
Machine Control
eME10
GNSS Intelligent Excavator Guidance System
The eSurvey eME10 is designed with high accuracy in mind and consumes less time by guiding excavator operations. It uses GNSS real-time dynamic positioning technology to obtain the bucket's real-time and accurate 3D position information by reading various tilt sensors installed on the excavator. The eME10 features intuitive, easy-to-learn software that runs on the Android operating system. The state-of-the-art hardware and software help operators of all skill levels work faster and more efficiently than ever, especially in complex areas. To sum up, you can get more in less time.

Centimeter-level Accuracy
Satisfy all your excavator construction needs; the real-time positioning accuracy can be up to ±3 cm.

Getting More in Less Time
Work faster and more efficiently by guiding excavator operations, including improving operation efficiency, reducing auxiliary measurement operators, improving the accuracy of operation results, and reducing repeated data checks.

10.1 Inch Screen
The 10.1-inch screen with 1280 * 800 resolution makes the tablet a high-fidelity device. 750 cd/m2 brightness makes it sunlight viewable. 

Rugged Hardware
Apply the eME10 even under harsh environmental conditions (like dust, mud, rain, extreme heat, and cold) for many years, with the rugged design of the display, GNSS receiver, positioning antenna, heading antenna, and tilt sensors.

Intuitive Software: Easy-to-use
View the 3D model in real-time for reference with the optimized interface full of colorful graphics and natural interactions for ease of use and productivity.

 

Product
eME10
Display
Processor ARM -A53 processor with 1.8 GHz
GPU AdrenoTM506
OS Android 7.0
RAM 2 GB DDR3
ROM 16 GB EMMC
SIM card Support
Screen size 10.1 inch TFT LCD
Resolution 1280 x 800
Brightness 750 cd/m2
Touch panel Capacitive
Input voltage 9 - 32 V dc
Dimension 271.9 mm x 194.6 mm x 41.5 mm
Weight 1.7 kg
Operating temperature -20℃ ~ +70℃
Storage temperature -30℃ ~ +80℃
Water / dustproof IP65
Wi-Fi 802.11 b/g/n
Bluetooth Support
USB USB 2.0 x 1
CAN CAN BUS x 1
COM RS232 x 1
Sensor
Absolute accuracy ±0.01° rms @25℃
Resolution 0.005°
Signal output CAN2.0B
Water/dust proof IP67
MTBF ≥50000h
Input voltage 9-36 V
MR1 GNSS Receiver
Channels 1100
Satellites tracking · GPS: L1C/A, L1C, L1P, L2C, L2P, L5
· BDS: B1I, B2I, B3I, B1C, B2a, B2b, ACEBOC
· GLONASS: G1, G2, G3
· GALILEO: E1, E5a, E5b, E5AltBOC, E6
· QZSS: L1C/A, L1C, L2C, L5, LEX
· SBAS L-Band
Warm start 60s
Cold start 10s
Frequency 5 Hz standard, up to 20 Hz
Positioning accuracy · RTK: H: 8 mm + 1 ppm; V: 15 mm + 2 ppm
· DGNSS: H: 0.3 m; V: 0.6 m
· Single: H: 1.2 m; V: 2.5 m
· SBAS: H: 0.3 m; V: 0.6 m
Heading accuracy · 0.16° rms @ 0.5 m
· 0.08° rms @ 1.0 m
· 0.04° rms @ 2.0 m
· 0.02° rms @ 5.0 m
Pitch accuracy 0.16° rms @1.0m
Roll accuracy 0.5°
Differential mode RTCM3, RTCM3.2, CMR, CMR+, ROX
Internal radio RX, 410 - 470 MHz
Port · RS232 x 2
· CAN x 2
Wi-Fi 2.4G Wi-Fi, 802.11 b/g/n
Bluetooth Support
Input voltage 7-36 V dc
Dimension 170 mm x 70 mm x 40 mm
Water/dust proof IP67
Vibration ISO16750
Operating temperature -40℃ ~ +85℃
Storage temperature -40℃ ~ +85℃
Humidity 95%
Copyright © 1994-2024 UniStrong All Right Reserved.