Language / 简体中文
overseas@unistrong.com
+86(10)5827 5505      
Advanced Components
UGM512
GNSS MEMS Integrated Navigation System
UGM512 GNSS MEMS integrated navigation system is a cost-effective GNSS and MEMS integrated navigation system for unmanned aerial vehicles and small-size unmanned vehicles. The product has built-in high-precision GNSS receiver and cost-effective MEMS inertial device and has a good performance.

UGM512 GNSS MEMS integrated navigation system is a cost-effective GNSS and MEMS integrated navigation system for unmanned aerial vehicles and small-size unmanned vehicles. The product has a built-in high-precision GNSS receiver and cost-effective MEMS inertial device with good performance. UGM512 can choose the raw data storage function and navigation post-processing software to provide the users with higherprecision positioning attitude data.

1.UGM512 (1 set):
The product host with built-in three-axis MEMS gyroscope, three-axis MEMS accelerometer and GNSS receiver, can provide accurate multiple parameter navigation information of high real time and reliability by a new generation satellite/inertial integrated navigation algorithm;

2.Satellite antenna (2 pieces):
2 GNSS positioning antennas are configured in the product;

3.Antenna cable (2 pieces):
Both ends of the antenna feeder are TNC male connectors with standard configuration of 5 meters. One end is connected to the satellite antenna, and the other end is connected to the product host;

4.Magnetic base (2 sets):
Magnetic base is used for fixed antenna as powerful magnet sucker;

5.Data/power cable (1 piece):
One piece of data cable supports two RS-232 interfaces, 1 RS-422 interface, one USB interface, one CAN interface, one PPS interface and power cable.


Accuracy (1σ)
Heading 0.5°dynamic alignment
0.1°dual antenna, 2m baseline
Attitude 0.5°
Positioning Autonomous: 1.2m
RTK: 2 cm + 1 ppm
Start Time ≤10 s
Dynamic Alignment Time 1 ~ 2 min
Time to Direction Finding with Dual Antennas ≤1 min

IMU Performance
Gyro Technology: MEMS
Output Range: ±450°/s
Bias: 20°/h
Accelerometer Output Range:±5g
Bias:≤1mg

Communication
Port 1 x RS422
1 x RS232
1 x CAN 2.0b
1 x PPS
1 x Event Mark
Subsidiary Sensor Speedometer
DVL
Atmospheric pressure altimeter
Storage Capacity 16 GB
Update Rate 100 Hz

Power
Voltage 9~36 VDC (24 VDC nominal)
Consumption ≤7W

Physical
Dimension 93 x 56 x 38 mm
Weight 230 g
Operating Temperature -40℃ ~ +60℃
Water/Dust Proof IP65
Copyright © 1994-2021 UniStrong All Right Reserved.