The UGM532 has built-in inertial measurement unit, dual GNSS positioning and orientation unit and odometer interface. The system supports GNSS dual systems. UGM532 combines the output system azimuth, which is more suitable for traffic measurement and surveying application. When the satellite signal is occluded, the system will enter the inertial navigation mode. With inertial navigation and odometer information, accurate positioning can be maintained for a certain period of time.
1.UGM532 (1 set):
The product host with built-in three-axis MEMS gyroscope,three-axis MEMS accelerometer and GNSS receiver, can provide accurate multiple parameter navigation information of high real time and reliability by a new generation satellite/inertial integrated navigation algorithm;
2.Satellite antenna (2 pieces):
2 GNSS positioning antennas are configured in the product;
3.Antenna cable (2 pieces):
Both ends of the antenna feeder are TNC male connectors with standard configuration of 5 meters. One end is connected to the satellite antenna, and the other end is connected to the product host;
4.Magnetic base (2 sets):
Magnetic base is used for fixed antenna as powerful magnet sucker;
5.Data/power cable (1 piece):
One piece of data cable supports two RS-232 interface, 1 RS-422 interfaces, one USB interface, one CAN interface, odometer interfaces, 24VDC rated power supply and adapts to 10~32V DC wide power range.
Accuracy (1σ) | ||
Heading | 0.1°dynamic alignment 0.1°dual antenna, 2m baseline | |
Attitude | 0.1° | |
Positioning | Autonomous: 1.2m | |
RTK: 2 cm + 1 ppm | ||
Position with Speedometer | 1% of Mileage | |
Start Time | ≤10 s | |
Dynamic Alignment Time | 1 ~ 2 min | |
Time to Direction Finding with Dual Antennas | ≤1 min | |
Post Processing(1σ) | ||
Heading | 0.05° | |
Attitude | 0.05° | |
Positioning | Outage Duration | Accuracy |
0s | 0.02m | |
10s | 0.04m | |
60s | 3m | |
300s | 20m | |
600s | 60m | |
IMU Performance | ||
Gyro | Technology: MEMS | |
Output Range: ±70°/s | ||
Bias: 20°/h | ||
Accelerometer | Output Range: ±2g | |
Bias: ≤1 mg | ||
Communication | ||
Port | 1 x RS422 1 x RS232 1 x CAN 2.0b 1 x PPS 1 x Event Mark | |
Subsidiary Sensor | Speedometer DVL Atmospheric pressure altimeter | |
Storage Capacity | 16 GB | |
Update Rate | 200 Hz | |
Power | ||
Voltage | 10~32 VDC (24 VDC nominal) | |
Consumption | ≤7W | |
Physical | ||
Dimension | 100 x 100 x 153 mm | |
Weight | 500g | |
Operating Temperature | -40℃ ~ +60℃ | |
Water/Dust Proof | IP65 |